Services – SLVTC

Home/ Services/ Chimney

SLVTC CERTIFIED SERVICE

Spotless Chimney,
Powerful Suction

Check-up · Cleaning · Repair · Installation · Uninstallation

Check-up

2 services

Wall Mount Chimney Check-up

Starts at ₹349/ visit

Full inspection of wall mount chimney — suction, motor, filters, and electrical connections.

Suction test
Filter inspection
Motor check
Electrical safety check

Island Chimney Check-up

Starts at ₹499/ visit

Full inspection of island/ceiling mount chimney — suction, motor, filters, and electrical connections.

Suction test
Filter inspection
Motor check
Electrical safety check

Cleaning

4 services

Basic Chimney Service (Wall Mount)

Starts at ₹649/ visit

Surface cleaning of baffle/mesh filter and body wipe-down for wall mount chimneys.

Filter surface clean
Body wipe-down
Suction check

Deep Chimney Service (Wall Mount)

Starts at ₹1,299/ visit

Complete deep cleaning of wall mount chimney — filter soak, motor service, duct inspection.

Filter deep soak & clean
Motor & fan service
Duct inspection & clean
Full suction restoration
Chimney taken to service center for professional deep cleaning

Basic Chimney Service (Island)

★★★★★ 5.0 (1 review) Starts at ₹849/ visit

Surface cleaning of baffle/mesh filter and body wipe-down for island/ceiling mount chimneys.

Filter surface clean
Body wipe-down
Suction check

Shankar ★★★★★

Excellent chimney service! The technician was punctual, professional, and cleaned everything thoroughly. The service was quick and hassle-free. Very satisfied with the overall experience. Highly recommended!

Deep Chimney Service (Island)

Starts at ₹1,849/ visit

Complete deep cleaning of island chimney — filter soak, motor service, duct inspection and full restoration.

Filter deep soak & clean
Motor & fan service
Duct inspection & clean
Full suction restoration
Chimney taken to service center for professional deep cleaning

Repair

2 services

Wall Mount Chimney Repair Service

Starts at ₹499/ visit

Motor, suction, ignition or sensor faults diagnosed and fixed at your home. Wall mount chimneys.

Motor & suction repair
Ignition fault fix
Noise & vibration fix
Sensor repair

Island Chimney Repair Service

Starts at ₹799/ visit

Motor, suction, ignition or sensor faults diagnosed and fixed. Island/ceiling mount chimneys.

Motor & suction repair
Ignition fault fix
Noise & vibration fix
Sensor repair

Installation (Fitting)

1 service

Chimney Installation Service

Starts at ₹749/ visit

Full end-to-end installation — wall mounting, ducting, pipe-fitting and electrical connection. All brands.

Wall mounting & drilling
Duct & pipe fitting
Electrical connection
Test run included

Uninstallation (Unfitting)

1 service

Chimney Uninstallation Service

Starts at ₹499/ visit

Safe dismounting of chimney body, duct disconnection and cleaning before removal. Ideal for home shifts or upgrades.

Panel & body removal
Duct disconnection
Site cleanup

The technician will inspect the chimney motor, suction performance, filters, lights, switches, and the overall working condition of the wall-mounted chimney.

Yes. The technician will check the suction performance and identify any issues affecting airflow or extraction efficiency.

Yes. The motor and its basic operating condition are inspected during the check-up.

Yes. The technician checks for abnormal noise, vibration, and other operational issues during inspection.

No. Basic or deep chimney cleaning is not included in the check-up service and will be charged separately if required.

No. The check-up is an inspection service only. Any repairs or spare-parts replacement required will be quoted and charged separately.

A standard wall mount chimney check-up usually takes 30–45 minutes, depending on the chimney condition.

Still have questions?

Our support team is here to help you

The technician will inspect the chimney motor, suction performance, filters, lights, switches, and the overall working condition of the island chimney.

Yes. The technician checks the suction performance and airflow to identify any issues affecting extraction efficiency.

Yes. The motor and its basic operating condition are inspected during the check-up.

Yes. The technician checks for abnormal noise, vibration, and other operational issues during the inspection.

No. Basic or deep chimney cleaning is not included in the check-up service and will be charged separately if required.

No. The check-up is an inspection service only. Any repairs or spare-parts replacement required will be quoted and charged separately.

A standard island chimney check-up usually takes 30–45 minutes, depending on the chimney condition.

Still have questions?

Our support team is here to help you

The service includes cleaning the chimney exterior, filters, oil and grease deposits, and accessible internal areas to improve overall cleanliness and airflow.

Yes. The chimney filters are thoroughly cleaned to help improve airflow and suction performance.

No. Basic cleaning removes normal grease and oil buildup. Heavy grease deposits or stubborn buildup may require a deep cleaning service.

No. Only accessible motor areas are cleaned if required. Complete motor servicing or internal motor cleaning is not included in the basic cleaning service.

A standard basic chimney cleaning usually takes 45–60 minutes, depending on the chimney condition.

No. Cleaning is a maintenance service only. Any repairs or spare-parts replacement required will be quoted and charged separately.

Yes. Cleaning can help improve airflow and suction performance when grease, oil, or dirt buildup is affecting the chimney.

Still have questions?

Our support team is here to help you

The service includes thorough cleaning of the chimney, filters, oil collectors, fan area, and accessible internal and external components to remove accumulated grease and dirt.

Yes. Deep cleaning is designed to remove stubborn grease, oil deposits, and accumulated dirt as much as possible.

Yes. The filters are thoroughly cleaned to help restore airflow and improve suction performance.

Yes. Accessible motor and fan areas are carefully cleaned as part of the deep cleaning service. Complete motor repair or replacement is not included.

The service typically takes 4–8 hours or up to 1 day, depending on the chimney condition and level of grease buildup.

No. Deep cleaning is a maintenance service only. Any repairs or spare-parts replacement required will be quoted and charged separately.

Yes. Deep cleaning can significantly improve suction and airflow when grease, oil, and dirt buildup are affecting chimney performance.

Still have questions?

Our support team is here to help you

The service includes cleaning the chimney exterior, filters, oil and grease deposits, and accessible internal areas to improve cleanliness and airflow.

Yes. The chimney filters are thoroughly cleaned to help maintain proper airflow and suction performance.

Yes. Basic cleaning removes regular grease, oil, and dirt buildup. Heavy grease deposits or stubborn buildup may require a deep cleaning service.

Yes. Accessible motor and fan areas are cleaned as required. Complete motor servicing or internal motor cleaning is not included in the basic cleaning service.

A standard basic island chimney cleaning usually takes 45–60 minutes, depending on the chimney condition.

No. Cleaning is a maintenance service only. Any repairs or spare-parts replacement required will be quoted and charged separately.

Yes. Cleaning can help improve airflow and suction performance when grease, oil, or dirt buildup is affecting the chimney.

Still have questions?

Our support team is here to help you

The service includes thorough cleaning of the chimney, filters, oil collectors, fan area, and accessible internal and external components to remove accumulated grease and dirt.

Yes. Deep cleaning is designed to remove stubborn grease, oil deposits, and accumulated dirt as much as possible.

Yes. The filters are thoroughly cleaned to help maintain better airflow and improve suction performance.

Yes. Accessible motor and fan areas are carefully cleaned as part of the deep cleaning service. Complete motor repair or replacement is not included.

The service typically takes 6–10 hours or up to 1 day, depending on the chimney condition and level of grease buildup.

No. Deep cleaning is a maintenance service only. Any repairs or spare-parts replacement required will be quoted and charged separately.

Yes. Deep cleaning can significantly improve airflow and suction when grease, oil, and dirt buildup are affecting the chimney’s performance.

Still have questions?

Our support team is here to help you

The technician will inspect, diagnose, and repair the wall mount chimney based on the identified issue and verify its proper operation after the repair.

Common issues include low suction, motor faults, unusual noise, lighting problems, switch failures, vibration, fan issues, and other operational faults.

Yes. The technician will inspect the chimney, identify the root cause of the problem, and explain the required repair before starting the work.

No. Spare parts are generally charged separately, depending on the components required for the repair.

Repair time depends on the nature of the fault and the availability of the required spare parts. Minor repairs can often be completed during the same visit.

Yes. We provide repair services for most major wall mount chimney brands, subject to spare-parts availability.

Yes. Warranty, where applicable, depends on the repair performed and the spare parts used. The technician will provide the applicable warranty details after the service.

Still have questions?

Our support team is here to help you

The technician will inspect, diagnose, and repair the island chimney based on the identified issue and verify its proper operation after the repair.

Common issues include low suction, motor faults, unusual noise, lighting problems, switch failures, vibration, fan issues, and other operational faults.

Yes. The technician will inspect the chimney, identify the root cause of the problem, and explain the required repair before starting the work.

No. Spare parts are generally charged separately, depending on the components required for the repair.

Repair time depends on the nature of the fault and the availability of the required spare parts. Minor repairs can often be completed during the same visit.

Yes. We provide repair services for most major island and ceiling-mounted chimney brands, subject to spare-parts availability.

Yes. Warranty, where applicable, depends on the repair performed and the spare parts used. The technician will provide the applicable warranty details after the service.

Still have questions?

Our support team is here to help you

The technician will properly install and fit the wall mount chimney, connect the required ducting, and perform a basic operational check after installation.

No. Installation service is currently available only for wall mount chimney models, subject to site requirements.

Yes. Standard drilling and fitting required for installation are included. Major civil work or structural modifications will be charged separately if required.

Yes. Standard duct pipe connection and fitting are included as per the installation requirements.

A standard wall mount chimney installation usually takes 1–2 hours, depending on the site conditions and installation requirements.

Basic installation is included. Additional accessories, extra ducting, clamps, elbows, or other materials required will be charged separately.

Yes. The technician will test the chimney’s motor, suction performance, lights, switches, and overall operation after installation.

Still have questions?

Our support team is here to help you

The technician will safely disconnect and remove the wall mount chimney from its existing installation.

Yes. The technician will carefully remove the chimney and its accessible mounting components.

Yes. The existing accessible duct connection will be safely disconnected during the uninstallation process.

Typically, the service takes around 20–40 minutes, depending on the chimney type and installation condition.

No. Basic removal is included. Packing or special transportation arrangements may be charged separately if required.

No. Wall repair, ceiling repair, drilling-hole filling, painting, or other civil work is not included in the uninstallation service.

No. We currently provide uninstallation services only for wall mount chimney models, subject to site conditions.

Still have questions?

Our support team is here to help you

Home/ Services/ Hob

SLVTC CERTIFIED SERVICE

Hob & Built-in
Cooktop Experts

Check-up · Cleaning · Repair · Installation · Uninstallation

Check-up

1 service

Hob Check-up

Starts at ₹349/ visit

Full diagnostic check of all burners, igniters, gas valves and flame performance.

Burner inspection
Igniter test
Gas valve check
Flame uniformity test

Number of Burners

Price: ₹349

Cleaning

2 services

Basic Hob Cleaning

Starts at ₹349/ visit

Surface cleaning of burners, grates and glass top. Quick maintenance service.

Burner surface clean
Grate wipe-down
Glass top polish
Performance check

Number of Burners

Price: ₹599

Deep Hob Cleaning

Starts at ₹599/ visit

Full deep degreasing of burners, grates, nozzles and glass top. Restores original shine.

Nozzle deep clean
Burner & grate soak
Glass top restoration
Flame test
Hob taken to our service center for professional deep cleaning
A 2-burner standby stove provided until your cleaned hob is returned

Number of Burners

Price: ₹899

Repair

1 service

Hob Repair Service

Starts at ₹499/ visit

Ignition faults, uneven flame, gas leakage detection and burner nozzle issues — all fixed at your doorstep.

Igniter repair
Burner nozzle fix
Gas valve repair
Leakage detection

Installation (Fitting)

1 service

Hob Installation Service

Starts at ₹349/ visit

Counter-top cutout, hob fitting, gas pipe connection and leak testing — all included in a single visit.

Granite/marble cutout
Gas pipe connection
Hob fitting & sealing
Leak test

Number of Burners

Price: ₹349

Uninstallation (Unfitting)

1 service

Hob Uninstallation Service

Starts at ₹349/ visit

Safe removal of built-in hob, gas pipe disconnection and counter-top cleanup. Ideal for upgrades or relocation.

Gas pipe disconnection
Hob body removal
Counter-top cleanup

Number of Burners

Price: ₹349

The technician inspects the burners, ignition system, knobs, gas connection, flame quality, and the overall working condition of the hob.

A standard hob check-up usually takes 20–30 minutes, depending on the appliance condition.

Yes. The technician inspects the gas connection and accessible joints for any signs of gas leakage.

Yes. Burner performance, flame color, flame stability, and ignition operation are thoroughly checked.

The service includes a visual inspection only. Basic cleaning may be performed if required, but deep cleaning is not included and will be charged separately.

No. The check-up is only for inspection and diagnosis. Any repairs or spare parts required will be quoted and charged separately after your approval.

Yes. The technician will explain the problem, recommend the necessary repair or maintenance, and provide an estimate if applicable.

Still have questions?

Our support team is here to help you

The technician diagnoses the hob issue and carries out the required repair based on the problem identified.

Common issues include ignition problems, burner issues, uneven flames, knob problems, gas leakage, and other functional issues.

Yes, the technician will inspect and diagnose the hob before starting the repair.

No, spare parts are generally charged separately, depending on the parts required.

The repair time depends on the issue and availability of required spare parts.

Yes, we provide repair services for most major hob brands, subject to parts availability.

No. Warranty, if applicable, depends on the spare parts used and the repair service provided.

Still have questions?

Our support team is here to help you

The technician will install the hob, secure it properly, connect it to the existing compatible gas line, and perform a basic functionality check.

Yes, we install most major built-in gas hob brands, subject to compatibility and installation requirements.

Yes. The technician will inspect the accessible gas connection, ensure proper fitting, and check for possible gas leaks.

No. Countertop cutting, enlargement, or any structural modifications are not included and will be charged separately if required.

A standard hob installation usually takes 30–60 minutes, depending on the installation conditions and gas connection setup.

Basic installation is included. Any additional accessories such as gas pipes, regulators, valves, clamps, or fittings will be charged separately if required.

Yes. The technician will test the burners, ignition system, flame quality, and overall operation after installation.

Still have questions?

Our support team is here to help you

The technician will safely disconnect the gas connection, remove the hob from the countertop, and perform a basic inspection of the installation area.

Yes. The technician will safely disconnect the accessible gas connection before removing the hob.

The technician will carefully remove the hob to minimize the risk of damage. However, removal may be affected by the condition of existing fittings, sealant, or the countertop.

A standard hob uninstallation usually takes 30–60 minutes, depending on the installation condition and accessibility.

Basic removal is included. Packing materials and transportation arrangements are not included and may be provided at an additional charge if requested.

No. Countertop repairs, filling the cutout, resealing, or any structural modifications are not included in the uninstallation service.

Yes. We provide uninstallation services for most major built-in gas hob brands, subject to their installation condition.

Still have questions?

Our support team is here to help you

Home/ Services/ Cooktop

SLVTC CERTIFIED SERVICE

Cooktop & Gas Stove
Service

Check-up · Cleaning · Repair · Installation · Uninstallation

Check-up

1 service

Cooktop (Gas Stove) Check-up

Starts at ₹199/ visit

Full inspection of burners, gas valves, igniters and flame performance. Safety check included.

Burner inspection
Igniter test
Gas safety check
Flame performance test

Number of Burners

Price: ₹249

Cleaning

2 services

Basic Cooktop (Gas Stove) Service

Starts at ₹399/ visit

Surface cleaning of burners, grates and stove body. Quick maintenance for regular upkeep.

Burner surface clean
Grate wipe-down
Body degreasing
Flame check

Number of Burners

Price: ₹499

Deep Cooktop (Gas Stove) Service

Starts at ₹849/ visit

Thorough deep cleaning — nozzle soak, grate degreasing, body polish and full flame restoration.

Nozzle deep soak
Grate deep degreasing
Body polish
Gas safety test
Flame restoration
Cooktop taken to our service center for professional deep cleaning
A 2-burner standby stove provided until your cleaned cooktop is returned

Number of Burners

Price: ₹999

Repair

1 service

Cooktop (Gas Stove) Repair Service

Starts at ₹249/ visit

Broken knobs, ignition faults, uneven flame, gas leakage or regulator issues — diagnosed and fixed at home.

Knob replacement
Ignition & spark repair
Regulator service
Leakage detection

Number of Burners

Price: ₹299

Installation (Fitting)

1 service

Cooktop (Gas Stove) Installation Service

Starts at ₹199/ visit

Full fitting of freestanding or built-in cooktop including gas connection and safety check.

Gas pipe connection
Fitting & levelling
Safety & leak test

Number of Burners

Price: ₹249

Cooktop (Gas Stove) Installation Service

Uninstallation (Unfitting)

1 service

Cooktop (Gas Stove) Uninstallation Service

Starts at ₹199/ visit

Safe gas disconnection and removal of cooktop. Ideal for kitchen remodelling or appliance replacement.

Gas valve shut-off
Pipe disconnection
Unit removal & cleanup

Number of Burners

Price: ₹249

Cooktop (Gas Stove) Uninstallation Service

The technician will inspect the burners, ignition system, control knobs, gas connection, flame quality, and the overall working condition of the cooktop.

Yes. The technician checks the accessible gas connections and fittings for possible gas leakage.

Yes. Burner performance, flame quality, flame stability, and ignition operation are thoroughly inspected.

Yes. The control knobs, ignition system, and basic operating controls are checked to ensure they function properly.

No. Cleaning or deep cleaning is not included in the check-up service and will be charged separately if required.

No. The check-up is an inspection service only. Any repairs or spare-parts replacement will be quoted and charged separately.

A standard cooktop check-up usually takes 30–45 minutes, depending on the appliance condition.

Still have questions?

Our support team is here to help you

The service includes cleaning the cooktop surface, burners, knobs, and other accessible areas to remove regular dirt, grease, and food residue.

Yes. The burners are cleaned to remove normal food residue and grease buildup for improved performance.

No. Basic cleaning removes regular grease and dirt. Heavy grease, carbon deposits, or stubborn burnt stains may require a deep cleaning service.

A standard basic cooktop cleaning usually takes 30–45 minutes, depending on the appliance condition.

No. Cleaning is a maintenance service only. Any repairs or spare-parts replacement required will be quoted and charged separately.

The cooktop will be cleaned thoroughly, but existing scratches, discoloration, rust marks, or permanent stains may remain.

Still have questions?

Our support team is here to help you

The service includes thorough cleaning of the cooktop surface, burners, knobs, and accessible internal areas to remove grease, carbon deposits, and accumulated dirt.

Yes. Deep cleaning is designed to remove stubborn grease, oil buildup, food residue, and burnt deposits as much as possible.

Yes. The knobs are carefully removed (where applicable) and cleaned as part of the deep cleaning service.

The service typically takes 4–8 hours or up to 1 day, depending on the cooktop condition and level of buildup.

No. Deep cleaning is a maintenance service only. Any repairs or spare-parts replacement required will be quoted and charged separately.

The service removes grease, dirt, and buildup as much as possible. However, existing scratches, discoloration, rust marks, or permanent stains may remain.

Yes. The backside is cleaned, and a suitable rust-removal treatment is applied to affected areas to help remove rust particles and improve the overall appearance.

Still have questions?

Our support team is here to help you

The technician will inspect, diagnose, and repair the cooktop based on the identified issue.

Common issues include ignition problems, burner issues, uneven flames, knob problems, gas leakage, and other operational issues.

Yes, the technician will inspect the cooktop and identify the cause of the problem before starting the repair.

No. Spare parts are generally charged separately, depending on the parts required.

Repair time depends on the issue and availability of the required spare parts.

Yes. We provide repair services for most major cooktop brands, subject to parts availability.

Warranty, if applicable, depends on the spare parts used and the repair service provided.

Still have questions?

Our support team is here to help you

The technician will properly position, fit, and install the cooktop, connect it to the existing compatible gas line, and perform a basic operational check.

Yes. We provide installation services for most major gas cooktop brands, subject to compatibility and installation requirements.

Yes. The technician will connect the accessible gas supply, ensure proper fitting, and check for possible gas leaks.

Standard fitting is included. Major countertop cutting, enlargement, modification, or civil work is not included and will be charged separately if required.

A standard cooktop installation usually takes 30–60 minutes, depending on the site conditions and installation requirements.

Basic installation is included. Any additional accessories such as gas pipes, regulators, valves, clamps, or fittings required will be charged separately.

Yes. The technician will test the burners, ignition system, flame quality, and overall operation after installation.

Still have questions?

Our support team is here to help you

The technician will safely disconnect the gas connection, remove the cooktop from its existing installation, and perform a basic inspection of the installation area.

Yes. The technician will safely disconnect the accessible gas connection before removing the cooktop.

The technician will carefully remove the cooktop to minimize the risk of damage. However, removal may be affected by the condition of existing fittings, sealant, or the countertop.

A standard cooktop uninstallation usually takes 30–60 minutes, depending on the installation condition and accessibility.

Basic removal is included. Packing materials and transportation arrangements are not included and may be provided at an additional charge if requested.

No. Countertop repair, gap filling, resealing, modification, or any other civil work is not included in the uninstallation service.

Yes. We provide uninstallation services for most major gas cooktop brands, subject to the installation condition.

Still have questions?

Our support team is here to help you

Home/ Services/ Cooking Range

SLVTC CERTIFIED SERVICE

Cooking Range
Service

Check-up · Cleaning · Repair

Check-up

1 service

Cooking Range Check-up

Starts at ₹499/ visit

Full diagnostic of all burners, oven, thermostat and gas connections.

Burner inspection
Oven cavity check
Thermostat test
Gas safety check

Cleaning

2 services

Basic Cooking Range Service

Starts at ₹1,499/ visit

Surface cleaning of burners, grates, oven cavity and body. Removes grease and restores hygiene.

Burner & grate degreasing
Oven surface clean
Body polish
Burner performance check

Deep Cooking Range Service

Starts at ₹2,499/ visit

Thorough deep cleaning — full burner disassembly, oven deep clean, body restoration and performance test.

Full burner disassembly
Oven deep cavity clean
Grate soak & degrease
Body restoration
Gas safety test
Cooking range taken to our service center for professional deep cleaning
A 2-burner standby stove provided until your cleaned cooking range is returned

Repair

1 service

Cooking Range Repair Service

Starts at ₹999/ visit

Burner faults, ignition issues, oven thermostat or knob problems — all brands repaired at your home.

Burner & ignition repair
Thermostat fix
Knob replacement
Gas valve service

The technician will inspect the burners, ignition system, control knobs, oven function, gas connection, flame quality, and the overall working condition of the cooking range.

Yes. The technician checks the accessible gas connections and fittings for possible gas leakage.

Yes. Burner performance, flame quality, flame stability, and ignition operation are thoroughly inspected.

Yes. The technician checks the basic heating, temperature control, ignition (where applicable), and overall oven operation.

No. Cleaning or deep cleaning is not included in the check-up service and will be charged separately if required.

No. The check-up is an inspection service only. Any repairs or spare-parts replacement required will be quoted and charged separately.

A standard cooking range check-up usually takes 30–60 minutes, depending on the appliance condition.

Still have questions?

Our support team is here to help you

The service includes cleaning the cooktop surface, burners, knobs, and accessible areas of the cooking range to remove regular grease, dirt, and food residue.

Yes. The burners are cleaned to remove normal dirt, grease, and food buildup for better performance.

Yes. Basic cleaning includes accessible oven areas. Heavy grease or deep oven cleaning requires a separate deep cleaning service.

Basic cleaning removes normal grease and dirt. Heavy grease, carbon deposits, or stubborn burnt stains may require deep cleaning.

A standard basic cooking range cleaning usually takes 45–60 minutes, depending on the appliance condition.

No. Cleaning is a maintenance service only. Any repairs or spare-parts replacement required will be quoted and charged separately.

The cooking range will be cleaned thoroughly, but existing scratches, discoloration, rust marks, or permanent stains may remain.

Still have questions?

Our support team is here to help you

The service includes thorough cleaning of the cooktop, burners, knobs, oven area, and accessible internal components to remove accumulated grease, carbon deposits, and food residue.

Yes. Deep cleaning is designed to remove stubborn grease, oil buildup, food residue, and burnt deposits as much as possible.

Yes. The burners are thoroughly cleaned to remove accumulated grease, carbon deposits, and food residue for improved performance.

Yes. The accessible oven areas are cleaned to remove grease, food residue, and built-up deposits.

The service typically takes 8–10 hours or up to 2 days, depending on the condition of the cooking range and the level of buildup.

No. Deep cleaning is a maintenance service only. Any repairs or spare-parts replacement required will be quoted and charged separately.

The service removes grease, dirt, and buildup as much as possible. However, existing scratches, discoloration, rust marks, or permanent stains may remain.

Still have questions?

Our support team is here to help you

The technician will inspect, diagnose, and repair the cooking range based on the identified issue and verify its proper operation after the repair.

Common issues include burner problems, ignition failure, uneven flame, oven heating issues, thermostat faults, knob problems, gas leakage, and other operational faults.

Yes. The technician will inspect the cooking range, identify the root cause of the problem, and explain the required repair before starting the work.

No. Spare parts are generally charged separately, depending on the components required for the repair.

Repair time depends on the nature of the fault and the availability of the required spare parts. Minor repairs can often be completed during the same visit.

Yes. We provide repair services for most major cooking range brands, subject to spare-parts availability.

Yes. Warranty, where applicable, depends on the repair performed and the spare parts used. The technician will provide the applicable warranty details after the service.

Still have questions?

Our support team is here to help you

Home/ Services/ Microwave

SLVTC CERTIFIED SERVICE

Microwave Oven
Repair Experts

All brands · All types · Doorstep service

Check-up

5 services

Not Heating Check-up

Starts at ₹349/ visit

Check-up for heating, overheating issues

Visitation fee will be adjusted in the final repair quote

Control Panel Issues Check-up

Starts at ₹349/ visit

Expert diagnosis of buttons, touchpad & display faults.

Visitation fee will be adjusted in the final repair quote.

Mechanical Issues Check-up

Starts at ₹349/ visit

Expert diagnosis of turntable, motor, fan & door faults.

Visitation fee will be adjusted in the final repair quote

Door Repair Check-up

Starts at ₹349/ visit

Expert diagnosis of latch, hinge, seal & alignment faults.

Visitation fee will be adjusted in the final repair quote

Not Working Check-up

Starts at ₹349/ visit

Check-up for no power, shutdown issues.

Visitation fee will be adjusted in the final repair quote

The technician will inspect the microwave to identify the reason it is not heating and check its major components.

Possible causes include issues with the magnetron, diode, capacitor, transformer, or other internal components.

Yes, the technician will check the basic power supply and operating functions.

Yes, the technician will test the microwave to understand the heating problem before recommending a solution.

No. Any required repair or spare-parts replacement will be charged separately.

No. Spare parts, if required, are charged separately based on the repair requirement.

Typically, the check-up takes around 30–45 minutes, depending on the microwave condition.

Still have questions?

Our support team is here to help you

The technician will inspect the control panel, buttons, display, touch controls, and basic operating functions.

Common issues include unresponsive buttons, faulty touch controls, display problems, and buttons not registering properly.

Yes, the display and its basic functionality will be inspected.

Yes, the technician will test the available buttons, touch controls, and related functions.

No. Any required repair or spare-parts replacement will be charged separately.

No. Spare parts, if required, will be charged separately based on the repair requirement.

Typically, the check-up takes around 30–45 minutes, depending on the microwave condition.

Still have questions?

Our support team is here to help you

The technician will inspect the microwave door, hinges, turntable, rollers, buttons, and other accessible mechanical components.

Common issues include door problems, turntable not rotating, unusual noise, loose components, and roller or hinge issues.

Yes, the door, hinges, latch, and closing mechanism will be inspected.

Yes, the turntable, roller ring, and rotation mechanism will be checked for proper operation.

No. Any required repair or spare-parts replacement will be charged separately.

No. Spare parts, if required, will be charged separately based on the repair requirement.

Typically, the check-up takes around 30–45 minutes, depending on the microwave condition.

Still have questions?

Our support team is here to help you

The technician will inspect the microwave door, hinges, handle, latch, and closing mechanism.

Common issues include a loose door, damaged handle, faulty hinges, improper closing, or latch problems.

Yes, the accessible door seal and proper closing of the door will be inspected.

Yes, the door alignment and locking mechanism will be checked for proper operation.

No. Any required repair or spare-parts replacement will be charged separately.

No. Spare parts, if required, will be charged separately based on the repair requirement.

Typically, the check-up takes around 30–45 minutes, depending on the microwave condition.

Still have questions?

Our support team is here to help you

The technician will inspect the microwave to identify the reason it is not operating and check its major functions.

Common causes include power supply issues, door switch problems, control panel faults, fuse issues, or internal component failures.

Yes, the technician will check the basic power supply, plug, and electrical connection.

Yes, the control panel, buttons, display, and basic operating functions will be tested.

Yes, the door, latch, and accessible safety mechanisms will be inspected.

No. Any required repair or spare-parts replacement will be charged separately.

Typically, the check-up takes around 30–45 minutes, depending on the microwave condition.

Still have questions?

Our support team is here to help you

Home/ Services/ Oven

SLVTC CERTIFIED SERVICE

Oven Service
Experts

Check-up · Cleaning · Repair

Check-up

1 service

Oven Check-up

Starts at ₹399/ visit

Full diagnostic of oven heating elements, thermostat, fan and door seal.

Heating element test
Thermostat check
Fan & motor inspection
Door seal check

Cleaning

2 services

Basic Oven Cleaning Service

Starts at ₹849/ visit

Interior surface cleaning, rack wipe-down and exterior polish.

Interior surface clean
Rack cleaning
Exterior polish
Door glass clean

Deep Oven Cleaning Service

Starts at ₹1,099/ visit

Full deep cleaning — interior degreasing, element cleaning, rack soak, door disassembly and glass clean.

Full interior degreasing
Element & fan clean
Rack deep soak
Door glass disassembly
Odor removal

Repair

1 service

Oven Repair Service

Starts at ₹499/ visit

Heating issues, thermostat faults, fan motor problems, door hinge repair — all types fixed.

Heating element repair
Thermostat fix
Fan motor repair
Door hinge & seal fix

The technician will inspect the oven’s heating system, temperature control, timer, switches, door, door seal, and overall working condition.

Yes. The heating elements and basic heating performance are checked to ensure the oven is functioning properly.

Yes. The technician will inspect the temperature control and identify any noticeable heating or temperature regulation issues.

Yes. The oven door, hinges, handle, and accessible door seal are inspected for proper operation and condition.

No. Basic or deep oven cleaning is not included in the check-up service and will be charged separately if required.

No. The check-up is an inspection service only. Any repairs or spare-parts replacement required will be quoted and charged separately.

A standard oven check-up usually takes 30–45 minutes, depending on the appliance condition.

Still have questions?

Our support team is here to help you

The service includes cleaning the oven interior, door, racks, trays, and other accessible areas to remove regular food residue, grease, and light buildup.

Yes. The oven racks and trays are cleaned as part of the basic oven cleaning service.

Basic cleaning removes normal grease and food residue. Heavy grease, burnt-on deposits, or stubborn buildup may require a deep cleaning service.

Yes. The accessible oven door, inner panel, and glass surfaces are cleaned during the service.

A standard basic oven cleaning usually takes 45–60 minutes, depending on the appliance condition.

No. Cleaning is a maintenance service only. Any repairs or spare-parts replacement required will be quoted and charged separately.

Most grease and food residue can be removed, but permanent stains, discoloration, rust marks, or surface damage may remain.

Still have questions?

Our support team is here to help you

The service includes thorough cleaning of the oven interior, racks, trays, door, glass, and other accessible areas to remove accumulated grease, food residue, and carbon deposits.

Yes. Deep cleaning is designed to remove stubborn grease, oil buildup, burnt food residue, and accumulated deposits as much as possible.

Yes. The oven racks and trays are thoroughly cleaned as part of the deep cleaning service.

Yes. The accessible oven door, inner panel, and glass surfaces are thoroughly cleaned.

The service typically takes 1–2 hours, depending on the oven condition and level of buildup.

No. Deep cleaning is a maintenance service only. Any repairs or spare-parts replacement required will be quoted and charged separately.

The service removes grease, dirt, and food buildup as much as possible. However, permanent stains, discoloration, scratches, rust marks, or surface damage may remain.

Still have questions?

Our support team is here to help you

The technician will inspect, diagnose, and repair the oven based on the identified issue and verify its proper operation after the repair.

Common issues include heating problems, temperature control faults, timer issues, door and hinge problems, switch failures, heating element faults, and other operational issues.

Yes. The technician will inspect the oven, identify the root cause of the problem, and explain the required repair before starting the work.

No. Spare parts are generally charged separately, depending on the components required for the repair.

Repair time depends on the nature of the fault and the availability of the required spare parts. Minor repairs can often be completed during the same visit.

Yes. We provide repair services for most major built-in and countertop oven brands, subject to spare-parts availability.

Yes. Warranty, where applicable, depends on the repair performed and the spare parts used. The technician will provide the applicable warranty details after the service.

Still have questions?

Our support team is here to help you

Home/ Services/ Combo Offer

SLVTC CERTIFIED SERVICE

Chimney & Hob
Combo Cleaning

Save more with our bundled chimney + hob cleaning packages

Combo Packages

4 services

Chimney & Hob Basic Cleaning

Starts at ₹100/ visit

Bundle deal — basic cleaning for both your wall mount chimney and hob in a single visit.

Chimney: Exterior Steam Cleaning, Filter Deep Degreasing
Hob: Hob & Knob Cleaning, Burner Care

Chimney & Hob Deep Cleaning

Starts at ₹1,999/ visit

Full deep cleaning for both your wall mount chimney and hob — restores peak performance.

Chimney:Chimney Exterior Deep Cleaning, Chimney Filter Intensive Cleaning
Hob: Hob Surface Deep Cleaning, Burner Deep Cleaning, Inner Chamber Degreasing

Island Chimney & Hob Basic Cleaning

Starts at ₹1,199/ visit

Bundle deal — basic cleaning for both your island chimney and hob in a single visit.

Island Chimney: Chimney Exterior Cleaning,Filter Cleaning
Hob: Hob Surface Cleaning, Burner Cleaning

Island Chimney & Hob Deep Cleaning

Starts at ₹2,499/ visit

Full deep cleaning for both your island chimney and hob — maximum performance restored.

Island Chimney: Chimney Exterior Deep Cleaning, Filter Intensive Degreasing, Internal Chimney Cleaning
Hob: Hob & Knob Deep Cleaning, Burner Deep Cleaning

Basic cleaning of the chimney and hob, including accessible surfaces, filters, burners, knobs, and removal of regular grease and dirt.

Yes, the chimney filters are cleaned to remove normal grease and oil buildup.

Yes, the hob burners cleaned as part of the service.

No, Basic cleaning removes normal grease and dirt. Heavy or stubborn buildup may require deep cleaning.

Typically, the service takes around 30–40 min, depending on the condition of the chimney and hob.

No. Any repair or spare-parts replacement required will be charged separately.

The appliances will be cleaned thoroughly, but existing scratches, discoloration, rust, or permanent stains may remain.

Still have questions?

Our support team is here to help you

Deep cleaning of the chimney filters, fan area, exterior, hob burners, burner caps, knobs, and cooking surface.

Yes. The service focuses on removing heavy grease, oil buildup, burnt food residue, and stubborn dirt.

Yes. Chimney filters are thoroughly cleaned to remove accumulated grease and improve airflow.

Yes. Burners and burner caps are thoroughly cleaned as part of the service.

Yes. Where applicable, rust particles on areas such as the hob tray or backside can be cleaned and treated to improve the appearance.

Typically, the service takes around 4–8 hours or 1 Day, depending on the condition of the chimney and hob.

No. Any repair or spare-parts replacement required will be charged separately.

Still have questions?

Our support team is here to help you

Cleaning of the chimney exterior, filters, oil and grease deposits, and accessible internal areas.

Yes, the chimney filters are cleaned to help maintain proper airflow and suction.

Yes, basic cleaning removes regular grease, oil, and dirt buildup. Heavy deposits may require deep cleaning.

Basic hob cleaning includes cleaning the glass surface, burners, knobs, and removing regular grease and food stains.

Typically, the service takes around 30–60 minutes, depending on the hob condition.

Basic cleaning covers normal dirt and grease. Heavy or stubborn stains may require a deep cleaning service.

No. The technician will bring the required cleaning materials and tools.

Still have questions?

Our support team is here to help you

Thorough cleaning of the chimney, filters, oil collectors, fan area, and accessible internal and external components.

Yes, the service focuses on removing stubborn grease, oil deposits, and accumulated dirt.

Yes, the filters are thoroughly cleaned to help maintain better airflow and suction performance.

Thorough cleaning of the hob surface, burners, knobs, and removable components.

Yes, the service targets stubborn grease, oil buildup, food residue, and burnt deposits.

Removable parts are carefully dismantled where required for deeper cleaning.

Typically, the service takes around 4–8 hours or 1Day, depending on the hob condition.

Still have questions?

Our support team is here to help you

Why SLVTC?

Since 2002

20+ years of trusted kitchen care in Bangalore.

Same-Day Service

Book before noon, get served today.

Hassle Free Booking

Book in minutes online or by phone — no paperwork.

All Major Brands

*Logos shown for representational purposes only. We are not officially associated with these brands.

Call Any One Number

Spotless Chimney,Powerful Suction

Check-up

Cleaning

Repair

Installation (Fitting)

Uninstallation (Unfitting)

Hob & Built-inCooktop Experts

Check-up

Cleaning

Repair

Installation (Fitting)

Uninstallation (Unfitting)

Cooktop & Gas StoveService

Check-up

Cleaning

Repair

Installation (Fitting)

Uninstallation (Unfitting)

Spotless Chimney,
Powerful Suction

Hob & Built-in
Cooktop Experts

Cooktop & Gas Stove
Service